5 Configuration > System
This system section provides you to configure the following items, including Time and Date,
COM Ports, Logging, Alarm, Ethernet, and Client List.
5.1 System > Time and Date
This section allows you to set up the time and date of router and NTP server. There are two
modes at Time and Date Setup, including Get from Time Server and Manual. The default
mode is Get from Time Server.
If the router has GPS function, you can turn on "GPS Time" for sync time from GPS server.
For Time Zone Setup, the Daylight Savings Time allows the device to forward/backward the
amount of time from Ahead of standard time setting automatically when the time is at the
Daylight Savings duration that you have set up before.
I. Get from Time Server
Set up the time servers of IPv4 and IPv6.
Select your local time zone.
Click Apply to keep your configuration settings.
To Next Page
Loading...
