Proscend M302-L - 10.2 VPN > IPSec

INDUSTRIAL 4G LTE CELLULAR ROUTER – B_UM V1.1.0
60
10.1.2 Set up OpenVPN Client
This section allows you configure the OpenVPN client route and authentication files. The files
could be imported by clicking Import button and the file should be downloaded from OpenVPN
server.
VPN > OpenVPN > Client VPN Mode
Item
Description
Client
Client Mode
Only support the Roadwarrior mode.
Server Address
Fill in WAN IP of OpenVPN server.
Route Client Networks
Select from Off or On. This setting needs to match the server side.
When enabled, the cellular router will auto apply the properly
routing rules.
NAT
1:1 NAT
 Tick to enable NAT Traversal for OpenVPN. This item must be
enabled when the router under NAT environment.
 Select from Off or On.
 When two routers’ LAN Subnet are same and create OpenVPN
tunnels, this function should be turned on.
Client-Security
Root CA
The Certificate Authority file of OpenVPN server could be
downloaded from OpenVPN server.
Cert
The certification file is for OpenVPN client, which could be
downloaded from OpenVPN server.
Key
The private key file is for OpenVPN client, which could be
downloaded from OpenVPN server.
P12
The PKCS#12 file is for OpenVPN client, which could be
downloaded from OpenVPN server.