Proscend M302-L - Page 63

INDUSTRIAL 4G LTE CELLULAR ROUTER – B_UM V1.1.0
59
(3) From Log tab, the interface will be shown the status of connection to make you follow the
suitation whenever is successful or fail connection.
VPN > OpenVPN
Item
Description
Mode
Turn on/off OpenVPN to select Disable or Enable.
VPN Mode
 Server: Tick to enable OpenVPN server tunnel.
 Client: Tick to enable OpenVPN client tunnel. The default is
Client.
 Custom: This option allows user to use the .ovpn
configuration file to quickly set up VPN tunnel with
third-party server or use the OpenVPN advanced options to
be compatible with other servers.
Status
Display the status of OpenVPN.
TLS Mode
Select from Disable or Enable for data security. The default is
Disable.
Cipher
The OpenVPN format of data transmission.
IPv6 Mode
Select from Disable or Enable. The default is Disable.
Device
Select from TUN or TAP. The default is TUN.
Protocol
Select from UDP or TCP Client which depends on the
application. The default is UDP.
Port
Enter the listening port of remote side OpenVPN server.
VPN Compression
Select Disable or Enable to compress the data stream. The
default is Disable.
Authentication
 Select from two different kinds of authentication ways:
Certificate or pkcs#12 Certificate.
 The pkcs#12 option is only available on the VPN client
mode.