Proscend M302-L - Service > Upnp; Service > SMTP

INDUSTRIAL 4G LTE CELLULAR ROUTER – B_UM V1.1.0
90
12.6 Service > UPnP
This section allows you to set up UPnP confirguration to select the mode from Disable or
Enable. The default UPnP is enabled for the cellular router.
Note:
UPnP™ (Universal Plug and Play) is a set of protocols that allows a PC to automatically
discover other UPnP devices (anything from an Internet gateway device to a light switch),
retrieve an XML description of the device and its services, control the device, and subscribe to
real-time event notification.
PCs using UPnP can retrieve the cellular router's WAN IP address, and automatically create
NAT port maps. This means that applications that support UPnP, and are used with UPnP
enabled cellular router, will not need application layer gateway support on the cellular router to
work through NAT.
12.7 Service > SMTP
This section provides you to send your email for the server. For instance, the email will be sent
to notify when the Alarm has a nofitication by the server.
Service > SMTP
Item
Description
Mode
Select from Disable or Enable. The default is Disable.
Server
The email will be sent through the server.
Port
There are three ports for SMTP communication between mail
servers.
 Port 25：Use TCP port 25 without encryption.
 Port 465：SMTP connections secured by SSL.
 Port 587：SMTP connections secured by TLS.
Username/Password
Fill in your username and password as the same your server.