Proscend M302-L - 7.2 LTE > GPS Config

INDUSTRIAL 4G LTE CELLULAR ROUTER – B_UM V1.1.0
29
7.2 LTE > GPS Config
This section allows you to set up GPS Configuration and connect RS232 from the used router to
have more detailed information for your specific purpose.
Note: You have to select RS232 item and the interface shows the option of COM Port.
For example, you can use some software depending on your requirements and activate the
GPS Configuration to display what information you need from your selecting software.
LTE > LTE Config > LTE Ping Health
Item
Description
LTE Ping Health
Select from Disable or Enable.
Interval
Input the interval seconds of ping.
IPv4 Host 1
Input the address of IPv4 Host 1.
IPv4 Host 2
Input the address of IPv4 Host 2.
IPv6 Host 1
Input the address of IPv6 Host 1.
IPv6 Host 2
Input the address of IPv6 Host 2.
Hint
Show the usage descriptions.
LTE > GPS Config
Item
Description
Report to
Select from RS232 and LOG.
COM Port
Show the COM 1 option after choosing RS232.
NMEA Type
Select from GSV, GGA, RMC and GSA.