Proscend M302-L - IP Routing > OSPF

INDUSTRIAL 4G LTE CELLULAR ROUTER – B_UM V1.1.0
50
9.3 IP Routing > OSPF
This section allows you to set up OSPF with three sub configurations, including General,
Interfaces and Networks configuration.
(1) General Configuration
You can have these settings for General configuration.
 Mode
 Redistribute local routes
 Redistribute connected routes
 Redistribute RIP routes
 Redistribute BGP routes
IP Routing > RIP > Interfaces
Item
Description
Interfaces
Mode
Select from Off or On to use or not to use the RIP function in the
interface.
Interface
Select the option of LAN.
Note: Not to support eth1 (WAN Ethernet) for WAN port.
Authentication
Select from none or md5 to approve authentication.
Note:Please offer Key and Key ID when you select md5 to use
HMAC-MD5.
Key
The key used for authentication (maxlength=16).
Key ID
The ID of the key used for authentication (1-255).
Passive
Select from Off or On to send out or not to send out RIP packets
on this interface.