Proscend M302-L - 5.3 System

To Next Page

To Previous Page

INDUSTRIAL 4G LTE CELLULAR ROUTER – B_UM V1.1.0

5.3 System > Alarm

This section allows you to configure the alarm.

Note:

If you select SNMP trap in Alarm output, you need to set up SNMP trap configuration from

Service SNMP.

System > Alarm

Item

Description

Mode

Turn on/off the Alarm configuration. Select from Disable or

Enable. The default is Enable.

Alarm Input

Select from SMS, VPN disconnect and WAN disconnect as input

to trigger alarm.

 SMS: It means team members on selected week day can

send SMS to the phone number of using SIM card to trigger

alarm.

 VPN disconnect: All tunnels get disconnected then trigger

alarm.

 WAN disconnect: WAN connections get disconnected then

trigger alarm.

Alarm Output

Select from SMS, SNMP trap and E-mail as alarm output.

Groups

Create your contact phone book for each group and edit your

information for each user.

SMS/E-mail

Write your messages and the messages limit 150 English

characters to deliver.

Proscend M302-L - 5.3 System > Alarm