Proscend M302-L - Reset Button; External Antenna; Connecting the Power Supply

INDUSTRIAL 4G LTE CELLULAR ROUTER – B_UM V1.1.0
7
2.5 Reset Button
Reset button allows you to reboot the unit or restore to factory default
setting.
Function
Operation
Reboot
Press the button for 1 second
Restore to factory default setting
Press the button for 5 seconds
Note:
Press the Reset button and count the time around 5 seconds. The LED Indicators will be
blinking to show you have activated the setting successfully.
2.6 External Antenna
Each unit has two antenna connectors (SMA), MAIN and AUX. Connect the antenna to MAIN
when you have only one antenna. Please tighten the connecting nut properly to ensure good
connection.
2.7 Connecting the Power Supply
The router requires a DC power supply in the range of 10~32V DC. Please ensure all
components are earthed to a common ground before connecting any wiring.
Pin
Power (10~32VDC)
FRAME GROUND
V -
Negative
V+
Positive