5.4 System > Ethernet
This section allows you to configure the Ethernet.
5.5 System > Client List
This section allows you to understand how many devices have been connected and their status
from the router. There are two types, one is DHCP Client and the other is Online. The default is
both types to show all status when the router is on DHCP Client and Online.
For DHCP Client type, the information shows IP address, MAC address, Hostname and the
expiry time of IP (Start/End).
Select from Auto, 100M Full, 100M Half, 10M Full, 10M Half
and Disable.
To Next Page
Loading...
