Proscend M302-L - Page 55

INDUSTRIAL 4G LTE CELLULAR ROUTER – B_UM V1.1.0
51
(2) Interfaces Configuration
There are 2 parts for OSPF Interfaces configuration.
 OSPF Interfaces Summary
Click Edit button to edit the existed interface.
Click Delete button to delete the existed interface.
 Add/Edit OSPF Interface
Note: This interface can be added at maximum is 2.
IP Routing > OSPF > General
Item
Description
General
Mode
 Off：OSPF function is off.
 On：OSPF function is on.
Redistribute local routes
 Off：Not redistribute local routes from the device's own routing
table.
 On: Redistribute local routes from the device's own routing
table.
Redistribute connected
routes
 Off：Not redistribute connected routes to networks which are
directly connected to the device.
 On: Redistribute connected routes to networks which are
directly connected to the device.
Redistribute RIP routes
 Off: Not redistribute RIP routes learned via the RIP routing
protocol.
 On: Redistribute RIP routes learned via the RIP routing
protocol.
Redistribute BGP routes
 Off: Not redistribute BGP routes learned via the RIP routing
protocol.
 On: Redistribute BGP routes learned via the RIP routing
protocol.