Proscend M302-L - Page 56

INDUSTRIAL 4G LTE CELLULAR ROUTER – B_UM V1.1.0
52
IP Routing > OSPF > Interfaces
Item
Description
Interfaces
Mode
Select from Off or On to use or not to use the OSPF function in
the interface.
Interface
Select the option of LAN.
Note: Not to support eth1 (WAN Ethernet) for WAN port.
Authentication
Select from none or md5 to approve authentication.
Note:
Please offer Key and Key ID when you select md5 to use
HMAC-MD5.
Key
The key used for authentication (maxlength=16).
Key ID
The ID of the key used for authentication (1-255).
Cost
The cost for sending packets via this interface (0: OSPF defaults).
Passive
Select from Off or On to send out or not to send out OSPF
packets on this interface.