Proscend M302-L - Page 57

INDUSTRIAL 4G LTE CELLULAR ROUTER – B_UM V1.1.0
53
(3) Networks Configuration
There are 2 parts for OSPF Networks configuration.
 OSPF Networks Summary
You can edit and delete the existed OSPF networks.
 OSPF Networks Add/Edit
This sub configuration is used to configure all the networks, the maximum is 2.
IP Routing > OSPF > Networks
Item
Description
Networks
Mode
Select from Off or On to enable the network setting.
Prefix
Set Prefix of the network
Prefix Length
Set Length of the prefix
Area
Routing area to which this interface belongs (0-65535, 0 means
backbone)