EasyManua.ls Logo

Proscend 6200-2W - Upnp; Sys Log

Proscend 6200-2W
93 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
73
by the CPE for validating the certificate from the ACS when using certificate-based authentication.
ACS User Name
Username used to authenticate the CPE when making a connection to the ACS using the CPE WAN Management
Protocol. This username is used only for HTTP-based authentication of the CPE.
ACS Password
Password used to authenticate the CPE when making a connection to the ACS using the CPE WAN Management
Protocol. This password is used only for HTTP-based authentication of the CPE.
Periodic Inform Interval
The duration in seconds of the interval, for which the CPE must attempt to connect with the ACS and call the Inform
method.
Connection Request Username
Username used to authenticate an ACS making a Connection Request to the CPE.
Connection Request Password
Password used to authenticate an ACS making a Connection Request to the CPE.
3
3
.
.
7
7
.
.
4
4
.
.
U
U
P
P
n
n
P
P
Enable UPnP(Universal Plug and Play) allow automatic discovery and configuration of equipment attached to your LAN.
UPnP is supported by Windows ME, XP or later.
If Enabled, this VPN Router will be visible via UPnP
If Disabled, this VPN Router will not be visible via UPnP
Press Apply to finish the setup.
3
3
.
.
7
7
.
.
5
5
.
.
S
S
y
y
s
s
L
L
o
o
g
g

Related product manuals