74
Syslog is a standard method of centralizing various logs. You can use a syslog server to store your servers logs in a
remote location for later perusal or long-term storage.
To send logs to the LOG server, you must configure the other servers from your network to send logs to that server.
1. Click the enable item of Syslog Server Service to turn on syslog service.
2. Input the syslog remote server address. The remote server address allows you to send logs to different files in the
syslog server.
3. Specify a UDP port number to which the syslog server is listening. The default value is 514.
Make sure this is not blocked from your firewall.
Press Apply to finish the setup.
3
3
.
.
7
7
.
.
6
6
.
.
T
T
e
e
l
l
n
n
e
e
t
t
There are quite a few Telnet clients available, many of which are free. For example, the Windows operating systems
are shipped with a Telnet client included (found at "c:\windows\telnet.exe"). This Telnet client is simple and functional.
For Telnet, you may change the default service port by typing the new port number. If you change the default port
number then you will have to let user who wish to use the service know the new port number. The default value is 23.
Press Apply to finish the setup.
3
3
.
.
7
7
.
.
7
7
.
.
S
S
S
S
H
H
To Next Page
Loading...
