MT-3109 AC/DC Digital Clamp Multimeter
Overview
This Operating Manual covers information on safety and
cautions. Please read the relevant information carefully and
observe all the Warnings and Notes strictly.
Warning
To avoid electric shock or personal injury, read the “Safety
Information" and "Rules for Safe Operation" carefully before
using the meter. Digital Clamp Multimeter Model (hereafter
referred to as "the Meter") is 3 3/4 digits with steady operations,
fashionable structure and highly reliable measuring instrument.
The Meter uses large scale of integrated circuit with double
integrated A/D converter as its core and has full range overload
protection
The Meter can not only measure AC/DC Voltage, AC/DC
Current, Frequency, Duty Cycle, Resistance, Diodes, Continuity
but also it has Data Hold, Sleep Mode and Relative Mode
features.
Unpacking Inspection
Open the package case and take out the Meter. Check the
following items carefully to see any missing or damaged part:
Item Description Qty
1 User’s manual 1 piece
2 Test Lead 1 pair
3 Test Clip 1 pair
4 Carrying Bag 1 piece
In the event you find any missing or damage, please contact
your dealer immediately.
Safety Information
This Meter complies with the standards IEC61010: overvoltage
category (CAT.II 600V) and double insulation.
CAT. II: Local level, appliance, PORTABLE EQUIPMENT etc.,
with smaller transient over voltages than CAT.III
CAT. III: Distribution level, fixed installation, with smaller
transient over voltages than CAT. IV
1
To Next Page
Loading...
