Electric wire insertion
Quick Operation Guide
The device has two identical ports (Channel A and
Channel B) for connecting the two identical lead
wires. Each lead wire is coupled to a pair of
identical electrode pads. Connect the first pair of
electrode pads to the two terminals of the first
lead wire, and insert the first lead wire’s other
end into the first port. Connect the second pair of
electrode pads to the two terminals of the second
lead wire, and insert the second lead wire’s other
end into the second port.
TIP: One channel is suggested for the first time
use.
3rd Step : Put the electrode pads
on massage-needed body area.
Electric wire connection to
electrode pads
To Next Page
Loading...
