Quality Assurance Tests
The test result of each step should meet the following pass criteria. Otherwise, it is
considered failed and you should contact Prospera Corporation for a repair or
replacement.
Key function test: When the functional keys are pressed step by step, the outputs
of the device should be identical to the following descriptions:
1. When the ON/OFF key at the off condition is pressed, the device is turned on and
massage output will be generated with level 1 speed and intensity.
2. When the mode-adjust keys is pressed, the corresponding mode showed on the
LCD screen will be generated.
3. Press the Speed up or down button to increase or decrease the speed
4. Press the module control keys “A” or “B” will generate output from module A or
module B.
5. When the time key is pressed, the countdown time can be selected from15, 10
and 5 minutes.
To Next Page
Loading...
