Programmable Fan Mode
Programmable Fan Mode is selected by pressing FAN until PROG appears in the
display. It is only available in programmable mode.
Programmable Fan Mode allows the user to run the fan continuously during a
selected program event. To use this feature, select fan ON while setting program
events. (See “Setting Your Program Schedule”, page 10).
23 User Manual
Adaptive Recovery Mode (ARM
™
)
Adaptive Recovery Mode is a feature enabled/disabled in the Installer Settings (See Installer Manual).
If enabled, the feature is automatically present while in programmable mode.
Adaptive Recovery Mode tries to reach your desired heating or cooling temperature at the time you have set in
your current program schedule, after a setback period. For example, if you set your heat down to 62° at night
and have a set point of 70° scheduled for 7:00 AM, the thermostat may turn on your heating system early in
order achieve a temperature of 70° by 7:00 AM.
This feature does not operate when the thermostat is in HOLD mode, if the program is temporarily overridden or
if emergency heat is selected on a multistage heat pump system.
To Next Page
Loading...
Need help?
General
