Protec PRS 500 E - Technical Data; Dimensions

41 pages

Save Page as PDF

To Next Page

To Previous Page

PRS 500 E

Instructions for use

5069

8002

PROTEC GmbH & Co. KG, In den Dorfwiesen 14, 71720 Oberstenfeld, Germany

von

Technical Data

7.1 Dimensions

PATIENT

OP*

Main Page

Table of Contents3
Document Effectivity6
General Notes7
Mechanical - Electric Warning7
Radiation Warning7
To the User8
Product Description9
Introduction9
Description9
Equipment Components9
Installation9
Floor Capacity10
Product Specific Characteristics10
Variable Height Radiographic Table10
Floor Railed X-Ray System Tube Support10
Vertical X-Ray System Image Receptor Stand10
Intended Use11
Indication and Contraindication11
Indications11
Contra Indications11
Intended User Group12
Conformity12
Safety Instructions13
General Safety Notice15
Requirements for Operation15
Operating of the Radiographic System15
Operating Type15
Operating Personnel15
Pinching and Collision Hazards16
Explosion Protection16
Radiation Protection16
Ventilation16
Interaction with External Devices16
2.1.10 Electromagnetic Environment and the Influence of Devices17
Control Elements and Device Displays18
Control Elements and Device Displays PROGNOST E18
Control Elements and Device Displays PROGNOST SH18
Control Elements and Device Displays Collimator21
Control Elements and Device Displays of X-Ray Tube21
Control Elements and Device Displays of X-Ray Generator21
Control Elements of Bucky, Grid Entity21
Control Elements and Device Displays of Vertical X-Ray System Image Receptor Stand PROVERT22
Vertical Carriage22
Control Elements and Device Displays of RAPIXX System22
Control Elements and Device Displays of CONAXX 222
Handling / Operation23
Operation with the Radiographic System23
Operation at the X-Ray System Table23
Position of Patients on the Tabletop23
Setting the X-Ray Unit on the MID Moving Bucky, Grid Entity23
Inserting a Cassette into the Cassette Tray23
Adjusting the Focus-Film Distance (FFD)23
Adjusting the Light Resp. X-Ray Field23
Exposure Preparation / Exposure Release23
Overtable Exposures24
Operation at Vertical X-Ray System Image Receptor Stand PROVERT25
Adjustment of the X-Ray Unit to the MID of a Cassette or Bucky/Grid Entity of a X-Ray System Image Receptor Stand (Vertical Center Beam)25
Adjustment of the Source to Image-Receptor Distance (SID)25
Adjustment of the Light-/ Radiation Field25
Exposure Preparation/ Release25
Operation X-Ray System Table PROGNOST E25
Operation Collimator25
Operation X-Ray Tube25
Operation X-Ray Generator26
Operation Bucky, Grid Entity26
Operation Vertical X-Ray System Image Receptor Stand PROVERT26
Operation RAPIXX System26
Operation Software26
4.10 Function of the PRS 500 E26
4.10.1 Switching On/Off the PRS 500 E26
Dosimetric Calibration (Only for PROVARIO HF)26
4.11 Exposure Automatic27
Safety and Maintenance28
Introduction28
Cleaning and Disinfection28
Cleaning28
Disinfection28
Check-Up and Maintenance29
Daily Controls (Prior to or During the Unit Operation)29
Regular Controls29
Only Original Spare Parts Are to be Used in Situations Requiring Component Replacement29
Maintenance29
Warranty29
Product Life Time29
Further Information29
Applied Parts and Parts Which Get Handled Like an Application Part30
Disposal30
Electrical Data31
Electromagnetic Compatibility (EMC) after en 60601-1-232
Guidelines and Manufacturers Declaration - Electromagnetic Interference32
Supporting Device)32
Technical Data33
Dimensions33
X-Ray System Table PROGNOST E35
Bucky, Grid Entity35
X-Ray Tube Column35
Vertical X-Ray System Image Receptor Stand35
Attenuation Equivalent36
Protection Art and Protection Class36
Automatic Cutoff Dose36
Analogue System36
Digital System36
Environmental36
Environmental Conditions During Operation36
Environmental Conditions for Shipping and Storage36
Description of Symbols, Labels and Abbreviations37
Symbols37
Identification Label39
Labels39
Position Symbols and Labels40
Abbreviations41

Protec PRS 500 E - Technical Data; Dimensions

Table of Contents

Other manuals for Protec PRS 500 E

Related product manuals