Protect ERA - Using RFID Tags

USING RFID TAGS
Note:
• If you hear a continuous beep for 2 seconds, the RFID tag has not been
recognised.
You can use RFID tags (available separately) to arm/disarm your alarm,
instead of inputting the passcode on your keypad.
1 2 3
4 5 6
7 8
0
#
*
9
Place the RFID tag on the RFID Reader.
A short beep will be heard from the
keypad.
To use RFID tags, you need to wake
up the keypad by waving your hand
in front of both Presence Sensors.
1 2 3
4 5 6
7 8
0
#
*
9
Page 14