7 8
0
#
*
9
USING YOUR KEYPAD
To operate the keypad, you need to wave your
hand in front of both Presence Sensors.
ARMING ALARM
To arm the alarm, enter:
[Passcode]
The keypad will then send a signal to the
hub, and arm your alarm. A notification
will be sent to your phone to confirm
the alarm has been armed.
1 2 3
4 5 6
7 8
0
#
*
9
Note:
• If you hear a continuous beep for 2 seconds, the command has not been
accepted.
• Continuously entering the passcode incorrectly 3 times will lock the keypad
for 4 minutes. The correct passcode will need to be input after 4 minutes
to unlock the keypad. The RFID tags can still be used.
>
Page 12
To Next Page
Loading...