Protect ERA - Changing the Passcode; Changing the Admin Code

CHANGING THE PASSCODE
To change the 4-digit passcode, enter:
[Admin code]
You will hear three short beeps to confirm the passcode has been changed.
> > > > >>
#
*
4 # #
[Enter new 4-digit code]
CHANGING THE ADMIN CODE
To change the 6-digit admin code, enter:
[Admin code]
You will hear three short beeps to confirm the admin code has been changed.
> > > > >>
#
*
5 # #
[Enter new 6-digit admin code]
ENABLING/DISABLING KEYPAD TONES
To enable or disable the keypad tones, enter:
*
#
If keypad tones are disabled, then you will not hear any confirmation tones
when accessing or changing settings, or if the incorrect passcode has been
used. We recommend keeping the tones enabled.
>
*
#
Page 11