How to Switch Device Channels
After are connected, press the corresponding channel key to
switch between devices.
Charging Guide
1. When low power, the backlight will automatically turn off first, and then the
power indicator light will turn red and flash quickly.
2. Insert the Type-C port into the keyboard and the USB-A port into the
computer to charge, the red light stays on while charging.
3. It takes 2–3 hours for one cycles full charged, and the indicator turns green
when fully charged.
BT 1 Device Channel
BT 2 Device
Channel
2.4G USB
Device Channel
- 4 -
To Next Page
Loading...
