ProtoArc EK01 Plus - Bluetooth Connection; Pairing Procedure

Bluetooth Connection
1 2
3
1. Turn the power switch to ON.
3. Turn on the Bluetooth settings on your device, search or select “ProtoArc
EK01 Plus” and start Bluetooth pairing until the connection is completed.
2. Single press / channel button, and
the indicator light flashes once to enter the
Bluetooth channel. Long press this
Bluetooth channel button for 3–5 seconds
again, the indicator light flashes quickly,
then the keyboard enters into the Bluetooth
pairing mode.
Bluetooth
Settings
ProtoArc EK01 Plus
ProtoArc EK01 Plus
Connected
On
1
2
3
4
- 3 -