What to do if my Protocol AeroDrone does not respond?
If your Protocol AeroDrone doesn't respond, first, ensure the aircraft and controller are synchronized by turning on the aircraft first, placing it on level ground, and then turning on the controller. Also, check and charge the aircraft battery and replace the controller batteries if they are depleted.
Why won't my Protocol AeroDrone hover or strafe correctly?
If your Protocol AeroDrone won't hover or strafe correctly, try these steps: 1. Ensure the aircraft was on level ground during synchronization. 2. Recalibrate the Altitude Sensor. 3. Re-trim flight controls.
What to do if Protocol AeroDrone Drones' response to control inputs intermittent or erratic?
If the Protocol Drones' response to control inputs is intermittent or erratic, replace the batteries in the controller, as the battery power may be nearly depleted.
Essential safety guidelines for operating the drone, including handling batteries and avoiding hazards.
Identifies the main parts of the drone, including canopy, blades, and landing gear.
Identifies the buttons and controls on the remote transmitter.
Covers installing remote batteries and preparing the drone for first use.
Instructions for charging the drone's battery and important charging precautions.
Steps to power on, sync the drone with the remote, and enter idle mode.
How to activate and use Compass Mode for easier drone navigation.
Explains how to take off, land, and control the drone's movement.
Details on performing 360° flips and adjusting speed modes.
How to choose between different flight speed modes for varying skill levels.
How to correct unintentional sideways or forward/backward drone drift.
Solutions for common issues like unresponsive controls and unstable flight.
Instructions on how to properly replace the drone's blades.
Tips to prevent fly-aways and understand the drone's operational range.
Information on acquiring spare parts, limited warranty, and customer support.
To Next Page
General
