How to fix intermittent control response in Protocol Drones?
If the response to control inputs is intermittent or erratic on your Protocol Drone, it's likely that the controller battery power is nearly depleted. Replacing the batteries in the controller should resolve this issue.
What to do if my Protocol Kaptur Drone does not respond?
If your Protocol Kaptur Drone is unresponsive, it may be due to these reasons: the communication between the controller and the aircraft was not synchronized during setup, or the battery power is depleted on either the aircraft or the controller, or both. To resolve this, first turn on the aircraft and place it on level ground, then turn on the controller to synchronize them. Additionally, ensure that both the aircraft and the controller are adequately charged, replacing batteries in the controller if needed.
Why won't my Protocol Kaptur Drone hover or strafe correctly?
If your Protocol Kaptur Drone is not hovering or strafing correctly, it could be because the aircraft wasn't on level ground during synchronization, or the trim settings are incorrect. To fix this, re-synchronize the aircraft and controller, and recalibrate the Altitude Sensor.
Instructions for installing batteries into the remote control and attaching blade guards.
Detailed steps for safely charging the drone's battery, including charging time and signals.
Important safety precautions and warnings to follow during battery charging to prevent damage or hazards.
Instructions for safely taking off, hovering, and landing the drone.
Guide on executing various 360-degree flip maneuvers with the drone.
To Next Page
General
