What to do if Protocol NEO-DRONE WIFI show 'OUT OF RANGE ALARM'?
If you receive an 'OUT OF RANGE ALARM' on your Protocol Drone, immediately fly the drone back into range to maintain control. Otherwise, you risk losing control of the drone.
What to do if Protocol NEO-DRONE WIFI show 'LOW BATTERY ALARM'?
If your Protocol Drone displays a 'LOW BATTERY ALARM', land the drone as soon as possible and recharge the battery.
Why does my Protocol NEO-DRONE WIFI Drones respond intermittently to controller inputs?
Intermittent or erratic response to control inputs in your Protocol Drone may be due to nearly depleted batteries in the controller. Replace the batteries in the controller.
What to do if Protocol Neo-Drone Wifi will not hover or strafe correctly?
If your Protocol Neo-Drone Wifi is not hovering or strafing correctly: 1. Ensure the aircraft was on level ground during synchronization. If not, re-synchronize the aircraft and controller. 2. The trim settings may be incorrect. Re-calibrate the drone.
Why do the motors stop running on my Protocol NEO-DRONE WIFI Drones?
The motors on your Protocol Drone may automatically stop running if a propeller is stuck. To resolve this, pull the throttle down and release it to restart the engines.
Provides essential safety guidelines for operating the drone.
Identifies and describes the main parts of the drone.
Identifies and describes the parts of the remote controller.
Instructions for inserting batteries into the remote controller.
Steps for attaching a smartphone to the drone controller.
Step-by-step guide for charging the drone battery.
Important safety and operational advice during battery charging.
Process for connecting the drone and remote controller.
How to put the drone's engines into idle mode.
Explains and instructs on using the drone's compass mode.
Instructions for taking off and landing the drone safely.
How to immediately stop the drone's motors in an emergency.
Guidance on basic flight maneuvers like rotation and movement.
How to change between different flight speed settings.
Adjusting the drone to correct unintentional sideways drift.
Adjusting the drone to correct unintentional forward/backward drift.
Adjusting the drone to correct unintentional spinning or turning.
Understanding and responding to low battery and out of range warnings.
Steps to re-calibrate the drone for stability issues.
Addresses common problems like no response or erratic flight.
Instructions on how to replace damaged or worn drone blades.
Tips and practices to avoid losing control of the drone.
Information on where to purchase spare parts for the drone.
Information regarding the product's warranty coverage and terms.
To Next Page
General