START-UP PROCEDURE
COMPASS MODE
Users have the option to exit the default orientation. In Compass Mode, users can
operate the drone without orientation. Regardless of where the drone is pointing,
it will turn left or right according to the remote’s command.
Compass Mode is good for beginners and is useful for drones that fly too far away
for the user to be able to tell the orientation.
Follow the below instructions to change to Compass Mode:
1. It is easiest to set up Compass Mode before flight. Sync and turn on
the engines.
2. Make sure your drone is aligned with the remote as indicated in the picture.
3. Press down on the Compass Mode button once. The drone’s back LED will
start to flash and the remote will beep twice. This indicates that the drone is
now in Compass Mode.
4. Press the Compass Mode button again to leave Compass Mode. The drone’s
LED will go steady and the remote will beep 3 times.
7
COMPASS MODE
To Next Page
Loading...
Need help?
General