Protocol AEROFLUX AP - User Manual

Questions and Answers

B
Breanna TranAug 2, 2025
What to do if my Protocol AeroFlux AP Drone does not respond?
- C
  Christopher RogersAug 2, 2025
  If your Protocol AeroFlux AP Drone does not respond, it could be due to a couple of reasons. First, the communication between the controller and the aircraft might not have been correctly synchronized during setup. To fix this, turn on the aircraft first, place it on level ground, and then turn on the controller. Alternatively, the battery power in either the aircraft or the controller might be depleted. Make sure to charge the aircraft and/or replace the batteries in the controller.
J
Jonathan ParkerAug 12, 2025
What to do if Protocol Drones response to control inputs intermittent?
- T
  Tiffany FosterAug 12, 2025
  If you're experiencing intermittent or erratic responses to your control inputs on your Protocol Drone, it's likely that the controller battery power is nearly depleted. Replace the batteries in the controller to resolve this issue.
M
michael52Aug 22, 2025
Why won't my Protocol AeroFlux AP Drone hover or strafe correctly?
- K
  Kaitlyn MyersAug 22, 2025
  If your Protocol AeroFlux AP Drone is not hovering or strafing correctly, it could be due to a couple of reasons. One possibility is that the aircraft was not on level ground when it was synchronized with the controller. Try re-synchronizing the aircraft and controller. Another reason might be that the trim settings are incorrect. In this case, reset the trim buttons on the controller and re-trim the flight controls.