To Next PageTo Next Page
Need help?Do you have a question about the Protool RGP 150-16 E and is the answer not in the manual?
General| Power input | 1500 W |
|---|---|
| Power | 1500 W |
| Tool diameter max. | 150 mm |
| Grinding wheel diameter | 150 mm |
| Tool fixture | M14 |
| Spindle thread | M14 |
Read all safety instructions and the Operating Instructions before using the machine.
General safety warnings for grinding, surface grinding, or grinding with wire brush.
Specific safety advice for various work activities including kickback prevention.
Safety guidelines specific to grinding and abrasive cutting operations.
Safety warnings and precautions for surface grinding activities.
Safety warnings when using wire brushes for grinding.
Safety guidelines for operating the machine in various environmental conditions.
Information on noise and vibration emission levels determined by EN 60 745.
Procedure for switching the machine on, off, and for continuous operation.
Details on starting current limitation, speed selection, and overload protection.
Guidance on choosing the appropriate tool head for specific applications.
Instructions and warnings for safely changing the tool head.
Step-by-step guide for securely installing a new tool head onto the spindle.
Procedure for safely detaching the tool head from the machine.
How to set the lever for controlling material removal depth.
Instructions for replacing grinding wheels, discs, brushes, and related components.
Importance and procedure for connecting to a suitable dust extraction system.
Information on using the lifting eye for a balancer.
Details on the surface guidance system for machine stability and transport.
