25
13 Selection of the tool head – table
Tool head Fitting Application
Thumb-
wheel
Carbide grinding
wheels with
“split-form” teeth,
set of 35
SZ-RGP 150
Removal of plaster for facing,
remains of tile adhesive and syn-
thetic resin plaster
4 – 6
Carbide grinding
wheels with
“fl at-form” teeth,
set of 35
FZ-RGP 150
Remove of soft plaster, fresh con-
crete, remains of concrete and
protective coatings
4 – 6
Diamond disc
DIA-HARD 150
Removal of hard materials, e.g.
concrete with a strength higher
than C10, hard screed
6
Diamond disc
DIA-ABRASIV 150
Removal of soft materials with
higher removal rates, e.g. fresh
concrete, tile adhesive, plaster for
facing, sandstone
6
Diamond disc
DIA UNI 150
Universal application, e.g. paints
(on concrete, plaster, wood),
adhesives, plaster for facing
5 – 6
Carbide disc
HW-150/SC
For elastic coatings, protective
coatings, latex-based and oil-
based paints, plaster and porous
concrete
2 – 3
To Next Page
Loading...
