Unpacking Your New DVD Player
3
6. Pull the plastic tab out of the battery slot on
the remote.
7. Attach the battery to the rear of the player:
Line up the four tabs on the battery with the
four corresponding slots on the player, drop
the tabs into the slots, then slide the battery
toward the front of the display.
8. Connect one end of the power cord
to a wall socket, and the other end
to the power adapter.
9. Connect the power adapter to the
IN 12V jack on the side of the player.
The CHARGE INDICATION light on
the battery should come on,
indicating that the battery is
charging.
COAXIAL AUDIO VIDEO PHONE
DC IN 12 V
POWER
ON OFF
IN 12V
VOL
OUT
OMPDV70X.book Page 3 Sunday, May 28, 2006 8:45 PM
To Next Page
Loading...
Need help?
General
