Provision WR706 - IP, URL Filtering, and Device List; 4.4 NAT Settings

17
You may want to do this with, for example, a Web server, FTP server, media server.

Hostname: the name of the device that you want to assign IP Address to.

MAC Address: the MAC Address of the device that you want to assign IP
Address to.

IP Address: input the permanent IP Address that you want to assign to the
device.
You can determine to enable it or not, and can also add new client and edit or delete
existing ones.
IP Filtering
IP filtering is used to control specific IP addresses to access .

Select “No Filtering" to disable this function.

Select “Block all in the list" to deny IP addresses that you have set in the IP
filtering list to access.
You can select to add new configuration in the list (no more than 10), edit or delete
exist ones.
URL Filtering
URL filtering is used to control devices on the LAN access to specific URLs.
 Select “No Filtering" to disable this function.
 Select “Block all in the list" to deny all devices in the LAN to access the URLs that
you have set in the URL filtering list.
You can select to add new configuration in the list (no more than 10), edit or delete
exist ones.
Device List
The Device List lists the information about the device in the LAN including IP address,
host name, MAC address and connect mode. Device list will refresh after every 10
seconds automatically.
4.4 NAT Settings
Application Settings
This part helps you configure UPnP .

UPnP: UPnP (Universal Plug and Play) provides connectivity among consumer
electronics, intelligent appliances and mobile devices from many different
vendors.

A VPN (Virtual Private Network) is a virtual computer network which established a