13
Safety Precautions
Version 1.0 | 13 |
• Leave hoist unattended if energized or loaded.
• Operate hoist unless load is centered.
• Operate beyond limits of load chain or extend chain.
• Use load chain or hook as an electrical or welding ground.
• Remove labels on electric chain hoist.
• Use hoist to lift load at an angle, nor pull or drag load
Inspection, Maintenance and Repairs:
• Only trained and authorized personnel may make repairs to equipment.
• Use only original Prowinch® parts. The use of any other part immediately voids warranty.
• Failure to use only original Prowinch® parts may endanger operator.
ALWAYS
NEVER
• Check quality of electrical connections.
• Check chain and keep it lubricated.
• Prevent others from being beneath load.
• Regularly inspect and maintain hoist.
• Check correct installation of hoist before using.
• Avoid contact with explosive gases or materials.
• Overload.
• Transport people or animals.
• Stand below load.
• Use hoist if exposed to rain, snow, or electrical storm.
• Leave load suspended for extended period of time. This may cause component deformation an accident.
• Exceed designated operating temperatures stated in this User Manual (dier depending on model).
• Expose hoist to water, sand, corrosive environment or other substances which may damage equipment.
To Next Page
Loading...
