Prowinch PWH - Page 24

24
Specications
| 24 | Version 1.0
Oil & Lubricant Recommendations
Capacity
(ton)
A B D E R T
Speed
(50HZ)
m/min
Motor
(Kw)
Min. Radius
of turn
Beam
Range
1 325 230 31 32 142 231 nov-21 0.4 0.8 52 - 145
2 375 245 31 44 142 231 nov-21 0.4 0.9 82 - 185
3 400 250 36 44 142 231 nov-21 0.75 1.0 100 - 185
5 420 290 43 44 142 231 nov-21 0.75 1.5 100 - 220
Load Chain
Do not allow chain to run dry.
Lubricant greatly increases life of load chain. Weekly lubrication and cleaning is satisfactory, but under hot, dirty, and ex-
treme conditions it may be necessary to clean chain at least once a day and lubricate it several times between cleaning.
Apply sucient lubricant to obtain natural runo and full coverage, especially in interlink area.
Apply Lubriplate® Bar and Chain Oil 10-R or equal lubricant. Machine or gear oil (grade ISO VG 46 or 68 oil or equivalent)
may be used as an alternative lubricant but must be applied more frequently.