Prowinch PWH - Page 28

28
Specications
| 28 | Version 1.0
Limit switch
Check by
pushing button
Operate until upper and
lower limit cause
automatic motor
shutdown
Replace limit switch,
disassemble and
clean limit lever
Movement
conrmation
Check by
pushing button
• Load chain can roll up easily
• Motor shutdown immediately when
operation stops
• All movements shutdown when E-stop
button pushed
• Other buttons cannot cause movement
when pushing the E-stop button
• All movements return to normal opera-
tion when E-STOP button relieved
Brake
Check by
pushing button
Brake quickly activates and operation of
bottom hook immediately stops (amount of
movement of the load chain is within 2 to 3
rings)
Chain spring
Visual inspection
and measure
dimensions
Replace chain spring
CHAIN
Length Of Spring
Standard
Ø6.3 145 140
Ø7.1 145 140
Ø10.0 135 129
Ø11.2 160 152