Version 1.0
9
9
WIRE ROPE: Check for broken wires, broken strands, kinks, and deformation or
damage to the rope structure.
CHAIN: Check for corrosion, wear, elongation, twist, nicks, or gouges. Keep Chain/
Wire Rope Clean and Lubricated.
REEVING: Check the rope for proper reeving and that rope parts are not twisted.
LIMIT SWITCHES: Ensure that all limit devices stop liing motion before the load
block or chain/rope stop strikes the hoist.
OIL LEAKAGE: Check for any signs of oil leakage on the crane/hoist and the oor.
UNUSUAL SOUNDS: Check for unusual sounds from the hoist while operating.
WARNING & SAFETY LABELS: Ensure that labels are not missing and they are
legible.
Safety Bulletin
To Next Page
Loading...
