Tsunami MP-8100 Installation and Management Guide 128
5.1 System
5.1.1 System Information
This section displays the basic system information. This information further helps in viewing the device details during
troubleshooting. For configuring the system information, click MANAGEMENT > System > Information.
Figure 5-1 System Information
Parameter Description
System Up-Time Specifies the duration of the device running time, since
its last reboot.
System Description Specifies the description of the system. It reports the
device name, current firmware and build number.
System Name Specifies the system name for easy identification of
BSU or SU. The System Name parameter is limited to
a length of 32 characters. Use the System Name of an
BSU to configure the BSU Name parameter on an SU if
you want the SU to register only with this BSU. If the
BSU Name is left blank on the SU, it can register with
any BSU that has a matching Network Name and
Network Secret.
Email Specifies the Email address of the concerned person
responsible for the device.
To Next Page
Loading...