Tsunami MP-8100 Installation and Management Guide 175
8
Troubleshooting
This chapter helps you to isolate and solve problems with your MP-8100 unit. If the procedures discussed in this document
does not provide a solution, or the solution does not solve your problem, check our support website at
http://support.proxim.com.
Before you start troubleshooting, check the details in the product documentation. For details about RADIUS, TFTP, terminal
and telnet programs, and Web browsers, refer to their appropriate documentation.
In some cases, rebooting the MP-8100 unit clears the problem. If nothing else helps, consider a Soft Reset to Factory
Default or a Forced Reload. The Forced Reload option requires you to download a new firmware to the MP-8100 unit.
The following topics are covered in this chapter:
• Gigabit Ethernet PoE
• Connectivity Issues
• Communication Issues
• Setup and Configuration Issues
To Next Page
Loading...