Tsunami MP-8100 Installation and Management Guide 101
Figure 4-42 VLAN Ethernet Configuration
2. Enter the parameters as described in the following table.
3. Click OK.
Click COMMIT for the changes to take effect.
4.8 Filtering Configuration (Bridge Only)
Filters are useful for preventing bridging of selected protocol traffic from one segment of a network to other segments (or
subnets). This feature can be used both to increase the amount of bandwidth available on the network and to increase
network security.
The Packet Filtering features help in controlling the amount of traffic exchanged between the wired and wireless networks.
Filtering features are available only in bridge mode operations. Using the filtering processes, you can restrict any unauthorized
packets from accessing the network.
Following are various filtering types supported by MP-8100:
• Ethernet Protocol Filter
• Static MAC Address Filter
• Advanced Filter
• TCP/UDP Port Filter
Parameter Description
Interface Displays the name of the interface.
VLAN Mode Select the VLAN mode as Access.
Access VLAN Id The Access VLAN Id values range from 1
to 4094. The default value is -1.
Access VLAN Priority The Access VLAN priority values range
from 0 to 7. The default priority is 0.
To Next Page
Loading...