Tsunami MP-8100 Installation and Management Guide 130
Figure 5-3 Licensed features
Parameter Description
Product Description Specifies the product description.
Number of Radios Specifies the number of radios that the device is licensed to
operate.
Number of Ethernet Interfaces Specifies the number of Ethernet interfaces that the device
is licensed to operate.
Radio 1 Allowed Frequency Band Specifies the wireless operational frequency band supported
by the device.
Maximum Output Bandwidth Specifies the Maximum output bandwidth limit in multiples
of 1Mbps (Refer to Note below).
Maximum Input Bandwidth Specifies the Maximum output bandwidth limit in multiples
of 1Mbps (Refer to Note below).
Maximum Aggregate Bandwidth Specifies the Max cumulative bandwidth of the device
which is the sum of configured output and input.
Product Family Specifies the Product Family of the device.
Product Class Specifies the Product Class of the device. It can be indoor or
outdoor product based on this parameter.
Maximum SUs Allowed Specifies the maximum number subscriber units allowed.
Allowed Operational Modes of Radio1 Specifies the device operational mode as BSU/SU.
To Next Page
Loading...