Tsunami MP-8100 Installation and Management Guide 132
5.2.2 Upgrade Configuration via HTTP
For updating the configuration via HTTP web interface, click MANAGEMENT > File Management > Upgrade
Configuration > HTTP.
Figure 5-5 HTTP Update-Configuration
To upgrade the configuration via HTTP
1. Click Browse and locate the configuration file.
2. Click Update to initiate the HTTP Update operation.
NOTE: After upgrading new configuration, the device must be rebooted.
5.2.3 Upgrade Firmware via TFTP
Using TFTP, the device can be upgraded with new firmware or configuration file. Also it can be used to retrieve the configuration
or log files from the device.
To upgrade the firmware via TFTP Server, click MANAGEMENT > File Management > Upgrade Firmware > TFTP.
To Next Page
Loading...