Proxim Tsunami MP-8100 Series - Services: Configuring the Passwords

System Management
Tsunami MP-8100 Installation and Management Guide 134
To upgrade the firmware via TFTP server:
1. Enter the TFTP Server IP Address.
2. Enter the name of the firmware file to update to the device.
3. Click Update to initiate the new firmware updation or click Update and Reboot to update and reboot with new
firmware immediately.
5.2.4 Upgrade Configuration via TFTP
For upgrading the configuration via TFTP Server, click MANAGEMENT > File Management > Upgrade Configuration >
TFTP.
Figure 5-7 Upgrade Configuration via TFTP
To upgrade the configuration via TFTP server
1. Enter the TFTP Server IP Address.
2. Enter the name of the configuration file to be updated to the device.
3. Click Update to initiate the TFTP update operation or click Update and Reboot to update and reboot with new
configuration immediately.
5.2.5 Retrieve From Device
5.2.5.1 HTTP Retrieve
For retrieving a configuration file or Event log or Temperature log file via HTTP web interface, click MANAGEMENT > File
Management > Retrieve From Device > HTTP.
To retrieve files from the device via HTTP
1. From the File Typ e list, select the type of file to retrieve.
a. Config: To retrieve the configuration file from the device.
b. Event Log: To retrieve the event log file from the device.
c. Temperature Log: To retrieve the temperature log from the device.