Tsunami MP-8100 Installation and Management Guide 152
NOTE: For better results, the Send Failure/Send Retrieve must be low in comparison to Send Success. The same applies
for Receive Retries/Receive Failure. Click Refresh to update the details in this page.
6.2.2 SU Statistics (BSU only)
WORP SU Statistics provides the information related to the SU currently connected to the BSU. This operation is available only
in BSU mode operations.
To view the Interface Statistics, click MONITOR > WORP Statistics > Interface 1 > SU Statistics.
Figure 6-4 WORP SU Statistics
The following table lists the parameters and their descriptions:
Field Description
SU Name System name of the SU connected.
Mac Address MAC address of the SU
connected.
Local Tx Rate (Kbps) BSU Tx Rate.
Remote Tx Rate (Kbps) SU Tx Rate.
Local Signal (dBm) Refers to the signal level with which the BSU received
wireless frames from the SU.
Local Noise (dBm) Refers to the noise level with which the BSU received
wireless frames from the SU.
Remote Signal (dBm) Signal level with which the SU receives wireless frames
from the BSU.
Remote Noise (dBm) Refers to the noise level with which the SU receives
wireless frames from the BSU.
To Next Page
Loading...