Tsunami MP-8100 Installation and Management Guide 198
Wireless Protocol
Interfaces
Transmit Power Settings
• Output Power Attenuation: 0 – 18 dB, in 1 dB steps
• Output Power Values will have a tolerance of +/-1 dB
• Total EIRP must be calculated based on integrated 23 dBi antenna gain
Category Specification
Wireless Protocol WORP (Wireless Outdoor Router Protocol)
Category Specification
Wired Ethernet Two auto MDI-X RJ45 Gigabit Ethernet
– Port #1 with PoE in & Data
– Port #2 with PoE out (802.3af pin
out) & Data
Serial Connector RJ11 port built-into the unit, DB9 Female
via a converter included
Modulation Tx power for
40/20 MHz,
2.4/5 GHz
SINGLE
(or)
DUAL
STREAM
64 QAM 5/6 13 dBm
64 QAM 3/4 14 dBm
64 QAM 2/3 15 dBm
16 QAM 3/4 17 dBm
16 QAM 1/2 17 dBm
QPSK 3/4 17 dBm
QPSK 1/2 17 dBm
BPSK 1/2 17 dBm
To Next Page
Loading...