Tsunami MP-8100 Installation and Management Guide 44
4
Advanced Configuration
This chapter provides details about the Tsunami MP-8100 parameters and describes the procedures to configure them using
Web-based management interface. These parameters can also be configured using the other management interfaces like
SNMP and CLI.
The following topics are covered in this chapter:
• System Configuration
• Network Configuration
• Ethernet Properties Configuration
• Wireless Configuration
• Security Configuration
• Quality of Service (QoS) Configuration
• VLAN Configuration (Bridge Mode only)
• Filtering Configuration (Bridge Only)
• DHCP Configuration
• Routing Features Configuration
To Next Page
Loading...