Tsunami MP-8100 Installation and Management Guide 58
NOTE: Click COMMIT for the changes to take effect.
4.4.5 Sensitivity Threshold Values
Sensitivity threshold values corresponding to various Satellite Density values are given in the table below:
4.4.6 MIMO Properties
The MIMO Properties screen allows you to configure the Multiple-Input-Multiple-Output radio to achieve maximum
performance and high throughput.
To configure MIMO properties
1. Click ADVANCED CONFIGURATION > Wireless > Interface1 > MIMO Properties. The MIMO Properties screen
opens as shown below.
Parameter Description
Channel Number The channel number indicates the channel that is
blacklisted.
Reason The reason for which that particular channel is
blacklisted. The most common reason for blacklisting a
channel is the presence of a radar in that channel.
Time Elapsed The time elapsed since the channel was blacklisted.
When the channel is black listed due to the presence of
a radar, it will be de-blacklisted after 30min.
Satellite Density Receive Sensitivity Threshold Defer Threshold
Large -96 dbm -62 dbm
Medium -86 dbm -62 dbm
Small -78 dbm -52 dbm
Mini -70 dbm -42 dbm
Micro -62 dbm -36 dbm
To Next Page
Loading...