Tsunami MP-8100 Installation and Management Guide 62
NOTE:
• By default, WORP Security is added to the wireless security configuration.
• Default authentication mode is WORP.
4.5.1.1 Creating a New Security Profile
To create a new security profile
1. Click ADVANCED CONFIGURATION > Security > Wireless Security.
2. Click Add in the Wireless Security Configuration screen to create a new entry. The Wireless Security Add Row screen is
displayed as shown below.
Figure 4-9 Creating a New Security Profile
Field Description
Profile Name Specifies the security profile name.
Entry status Used to enable or disable the security profile.
Edit Click Edit to modify the Profile parameters.
To Next Page
Loading...