Proxim Tsunami MP-8100 Series - Page 69

Advanced Configuration
Tsunami MP-8100 Installation and Management Guide 69
• Up to 4 pairs of Destination IP address + Mask
• Up to 4 source MAC addresses + Mask
• Up to 4 destination MAC addresses + Mask
NOTE: IP Address, TCP/UDP Port, MAC Address need to be configured separately and associate those classification in
PIR details if required.
A good example is provided by the 18 predefined PIRs. Note that these rules help identify specific traffic types:
1. All – No classification fields, all traffic matches
2. L2 Multicast
a. Ethernet Destination (dest = 0x010000000000, mask = 0x010000000000)
3. L2 Broadcast
a. Ethernet Destination (dest = 0xffffffffffff, mask = 0xffffffffffff)
4. Cisco VoIP UL
a. TCP/UDP Source Port Range (16,000-33,000)
b. IP Protocol List (17 = UDP)
5. Vonage VoIP UL
a. TCP/UDP Source Port Range (5060-5061, 10000-20000)
b. IP Protocol List (17 = UDP)
6. Cisco VoIP DL
a. TCP/UDP Destination Port Range (16,000-33,000)
b. IP Protocol List (17 = UDP)
7. Vonage VoIP DL
a. TCP/UDP Destination Port Range (5060-5061, 10000-20000)
b. IP Protocol List (17 = UDP)
8. TCP
a. IP Protocol List (6)
9. UDP
a. IP Protocol List (17)
10. PPPoE Control
a. Ether Type Rule (Ether Type = DIX-Snap, Ether Value = 0x8863)
11. PPPoE Data
a. Ether Type Rule (Ether Type = DIX-Snap, Ether Value = 0x8864)
12. IP
a. Ether Type Rule (Ether Type = DIX-Snap, Ether Value = 0x0800)
13. ARP
a. Ether Type Rule (Ether Type = DIX-Snap, Ether Value = 0x0806)
14. Expedited Forwarding
a. IP TOS/DSCP (ToS low=45(0x2D), ToS high=45(0x2D), ToS mask = 63(0x3F))
15. Streaming Video (IP/TV)
a. IP TOS/DSCP (ToS low=13(0x0D), ToS high=13(0x0D), ToS mask = 63(0x3F))
16. 802.1p BE