Tsunami MP-8100 Installation and Management Guide 7
• Chapter 7 Procedures: Provides details about the various procedures involved in the operation of the MP-8100 units
using the Web interface.
• Chapter 8 Troubleshooting: Provides instructions and solutions to solve the issues you may encounter while
installing and using the MP-8100 units.
The appendixes contain supplementary information, including frequency domain tables, channel frequency, and Technical
Support information.
If you are already familiar with this type of product, you can use the Quick Install Guide to install the unit.
Reference Manual
As a supplement to the Tsunami MP-8100 Installation and Management Guide, the Tsunami MP-8100 Reference Manual
provides the following information:
• Command Line Interface: Documents the text-based configuration utility’s keyboard commands and parameters.
• MIB Browser for SNMP Interface: Provides information and instructions on using the MIB Browser in Snmpv1-V2c
and Snmpv3.
• Event Log Error Messages: Documents the error messages that you may see in the Event Log.
• System Alarm Traps: Documents the alarm traps that you can set for alarm notification.
• Microsoft Windows IAS Radius Server Configuration: Provides information to assist you in setting up the IAS
Radius Server.
• Glossary: Describes terms used in the Tsunami MP-8100 documentation and in the wireless industry.
To Next Page
Loading...